Q: What can I clip a tarp to without grommets?
A tarp clip like this one grips the tarp material directly between two toothed jaws, so you don't need a grommet or hemmed edge to get a secure hold.
00K0905 - EasyKlip, each
Made from tough glass-fiber-reinforced nylon, this versatile clip exerts a firm, no-slip hold on tarps or other sheet materials, even those without a hem.
One section of the two-piece jaw has a 3/8" diameter hole for a cord or bungee; as tension on the cord increases, the jaw is pulled more tightly against the opposing jaw, wedging the material in place.
The 1 1/2" wide toothed gripping surface helps distribute the load, minimizing the risk of tearing. Pressing a lever releases the jaws, allowing easy removal. 3" long with a load capacity of over 200 lb. An excellent design with many uses.
A tarp clip like this one grips the tarp material directly between two toothed jaws, so you don't need a grommet or hemmed edge to get a secure hold.
It's rated for loads over 200 lb, with the jaw tightening further as tension increases rather than slipping loose.
Not necessarily. The 1 1/2" wide toothed surface spreads the load across the material instead of concentrating it at one point, which is what usually causes tearing.
Yes, one jaw includes a 3/8" hole sized for a cord or bungee, so you can tie down whatever the clip is holding in place.
Press the lever to release the two-piece jaw, so you can pull the clip free without wrestling it off by hand.
| Materials | Glass-fiber-reinforced nylon |
| Dimensions | 3" long; 1 1/2" wide gripping surface |
| Compatibility Dimensions | Accepts cord or a bungee up to 3/8" via the mounting hole |
| Capacity | Over 200 lb pull |
| Includes | Tarp clip |
| Package Quantity | 1 item |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Variations:
EasyKlip
Made from tough glass-fiber-reinforced nylon, this versatile clip exerts a firm, no-slip hold on tarps or other sheet materials, even those without a hem.
One section of the two-piece jaw has a 3/8" diameter hole for a cord or bungee; as tension on the cord increases, the jaw is pulled more tightly against the opposing jaw, wedging the material in place.
The 1 1/2" wide toothed gripping surface helps distribute the load, minimizing the risk of tearing. Pressing a lever releases the jaws, allowing easy removal. 3" long with a load capacity of over 200 lb. An excellent design with many uses.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
