Q: How much weight can each shelf holder support?
Each support carries up to 25kg on its own; when a pair is properly fastened, they can carry a 300mm-deep shelf up to 18kg total.
Glass application
Finish:
Choose an option to view item availability.
These holders provide support for glass or wooden shelves, and have the advantage of a tilt adjustment mechanism to raise the leading edge of the shelf for levelling.
Adjustable to accommodate shelf thicknesses from 7mm to 41mm (9/32" to 1 9/16"), each has an upper jaw mechanism that mounts to a wall and an interlocking lower jaw support. Turning an adjuster screw in the underside of the support arm (using a #2 Phillips or Pozidriv bit) raises or lowers the front of the shelf within a 3mm (7/64") range, letting you set the shelf level or tilted slightly upwards to ensure items won't roll off.
While each support has a load rating of 25kg (55 lb), its actual capacity depends not only on the material to which it is mounted and the fasteners used, but also on the depth of the shelf. If installed with the included screws and anchors in 5/8" drywall, a pair of holders can be expected to support a 300mm (12") deep shelf weighing up to 18kg (40 lb). Made of strong zinc alloy with a silver or stainless-steel finish, and non-marring plastic shelf contact surfaces.
Made in Italy.
Each support carries up to 25kg on its own; when a pair is properly fastened, they can carry a 300mm-deep shelf up to 18kg total.
They adjust to fit shelves from 7mm to 41mm (9/32" to 1 9/16") thick, which covers most glass and solid-wood shelving.
Yes, an adjuster screw under the support arm of these adjustable shelf holders raises or lowers the shelf front by up to 3mm so you can level it or angle it slightly upward.
No, the jaws have non-marring plastic contact surfaces where they meet the shelf, so glass and finished wood aren't scratched.
A #2 Phillips or Pozidriv screwdriver bit operates the adjuster screw on the underside of the support arm.
They're available in silver or stainless steel, so you can match existing cabinet or shelving hardware.
| Materials | Zinc alloy; plastic shelf contact |
| Compatibility | Fits glass or wood shelves 7mm–41mm (9/32"–1 9/16") thick; adjustable up to 3mm to level or tilt the shelf front |
| Capacity | Maximum 25kg (55 lb) per support; up to 18kg (40 lb) for a 300mm-deep shelf per fastened pair |
| Includes | Shelf holder pair (upper wall bracket and support arm) |
| Color/Finish | Silver or stainless steel |
| Package Quantity | 1 pair |
| Country of Origin | Italy |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Finish
Variations:
Adjustable Shelf Holders
These holders provide support for glass or wooden shelves, and have the advantage of a tilt adjustment mechanism to raise the leading edge of the shelf for levelling.
Adjustable to accommodate shelf thicknesses from 7mm to 41mm (9/32" to 1 9/16"), each has an upper jaw mechanism that mounts to a wall and an interlocking lower jaw support. Turning an adjuster screw in the underside of the support arm (using a #2 Phillips or Pozidriv bit) raises or lowers the front of the shelf within a 3mm (7/64") range, letting you set the shelf level or tilted slightly upwards to ensure items won't roll off.
While each support has a load rating of 25kg (55 lb), its actual capacity depends not only on the material to which it is mounted and the fasteners used, but also on the depth of the shelf. If installed with the included screws and anchors in 5/8" drywall, a pair of holders can be expected to support a 300mm (12") deep shelf weighing up to 18kg (40 lb). Made of strong zinc alloy with a silver or stainless-steel finish, and non-marring plastic shelf contact surfaces.
Made in Italy.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
